LCD projector

Cheap projector tips

LCD is mean Liquid Crystal Display. LCD projectors send light from a halogen lamp through three LCD panels, the red, green, and blue components of the video signal to display an image. As light passes through the panels, individual pixels can be opened to allow light to pass or closed to block the light. The combination of open and closed pixels can produce a wide range of colors and shades in the projected image.

Halogen lamps are used because they output an ideal color temperature and a broad spectrum of color. These lamps also have the ability to produce an extremely large amount of light within a small area: current projectors average about 2,000-4,000 ANSI lumens.

LCD projectors tend to be smaller and more portable than other types of projection systems because its small halogen lamps and the ability to project an image on any flat surface. But the best image quality is found using a blank white or grey surface, so dedicated projection screens are often used.

Perceived color in a projected image is a factor of both projection surface and projector quality. Since white is more of a neutral color, white surfaces are best suited for natural color tones; as such, white projection surfaces are more common in most business and school presentation environments.

However, darkest black in a projected image is dependent on how dark the screen is. Because of this, some presenters and presentation space planners prefer gray screens, which create higher perceived contrast. The trade-off is that darker backgrounds can throw off color tones. Color problems can sometimes be adjusted through the projector settings, but may not be as accurate as they would on a white background.

Early LCD systems were used with existing overhead projectors. The LCD system did not have a light source of its own: it was built on a large "plate" that sat on top of the projector in place of the transparencies. This provided a stop-gap solution in the era when the computer was not yet the universal display medium, creating a market for LCD projectors before their current main use became popular.

This technology is employed in some sizes of rear projection television consoles, as there are cost advantages when employed in mid size sets (40 to 50 inch diagonal). This is not expected to have much longevity in the "home theater" marketplace due to expected improvements cost/performance of competing technologies, particularly in direct-view LCD panels at the lower range of sizes and DLP projection in the larger sizes.[verification needed] Another advantage of using this LCD projection system in large television sets is to allow better image quality as opposed to a single 60 inch television, although currently an equal of an LCD projector is the LG 100 inch LCD TV, still in prototype stages this TV is a huge advancement towards projector sized televisions. A common rule of thumb is that an LCD's image quality will decrease with a size increase. A workaround is to use a small lcd panel (or panels) and project them through a lens onto a rear projection screen to give a larger screensize (with a decreased contrast ratio) but without the quality loss.

In 2004 and 2005, LCD front projection has been enjoying a come-back because of the addition of the dynamic iris which has improved perceived contrast up to the levels of DLP.

The basic design of an LCD projector is frequently used by hobbyists who build their own DIY projection systems. The basic technique is to combine a high CRI HID lamp and ballast with a condenser and collector fresnel, an LCD removed from a common computer display and a triplet.